ME9.2 Quickflash (EK924 EK928)


ME9.2 ECU Flash Tool with EWS Delete
Current version: v1.51

SKU: omadf Categories: ,


Bosch ME9.2 ECU DME Flashing for BMW’s n42 4 cylinder and n62 v8 (EK294 and EK928)

-FULL and PARTIAL reads*

-FULL (program and tune) and PARTIAL flashes including version changing via OBD2 port*

-EWS IMMO Delete* (ECU swap only! EWS module with key must still be plugged in)

-Checksums automatically corrected

-Allows for DTCs to be read and reset

-Allows adaptation clearing

After downloading, your activation license is automatically sent to the email used to purchase. Be sure you activate the license on the computer you plan to use this on as it is one license per computer!

Internet connection required

Windows 7 and newer
FT232RL(q) chipset cable  and highly recommended with ediabaslib firmware.

Note: This is compatible with the n42 EK924 and N62 EK928(_2). Some ME9.2 ECUs are EK928_4, EK928_5, EK928_7, etc which are not compatible with this tool. You can type your DME part number into realoem to verify.

*See chart below to verify compatibility. EWS module must still be present. Allows for swapping of ECU. See chart below to verify compatibility

Requires FT232RL chipset cable.

Commercial version available upon request.

Beware of scammers advertising look-alike software. This tool is only sold at