Description
The all-in-one KDCAN cable for BMW
Most K+DCAN cables cut corners somewhere. The BTT KDCAN cable combines the three things that matter for safe, fast flashing in one cable: genuine FTDI and Atmel chipsets, EdiabasLib firmware pre-flashed, and an integrated K-Line / D-CAN switch. Every cable is tested before it ships from the USA and is backed by a 1-year warranty.
Key advantages
- Fast flashing: noticeably quicker flashing than standard cables.
- Stable and safe: genuine chips and updated firmware keep communication stable and help prevent corrupted ECUs.
- Works with demanding DMEs: recommended for D-CAN DMEs such as MSS6x that generic cables struggle with.
- One cable for every E-Series: flip the switch for K-Line or D-CAN cars.
Why the EdiabasLib firmware matters
Unmodified K+DCAN cables sold online have a firmware bug that can corrupt certain BMW ECUs, and they don’t run at full speed. Ours comes pre-flashed with EdiabasLib firmware, so it’s ready to use out of the box:
- Faster CAN communication (block size 0 and no separation time)
- CAN mode can be configured at any time, not only after power on
- Configurable CAN parameters (block size and separation time)
- Correct ignition status display in K-Line mode
- Bootstrap loader for firmware updates without opening the cable
- Lower power consumption thanks to sleep mode
K-Line / D-CAN switch
- Switch left: K-Line mode for 1996 to 2007 vehicles
- Switch right: D-CAN mode for 2007 and newer vehicles
No pin bridging or second cable needed.
Compatibility
- Vehicles: all BMW E-Series and MINI R-Series. Also works for diagnostics and coding on F- and G-Series; flashing F- and G-Series requires an ENET cable.
- Software: all BTT E-Series Quickflash tools, plus dealer diagnostic and coding software and other K+DCAN-compatible tools.
- Computer: Windows XP through Windows 11, 32-bit or 64-bit. Not compatible with ARM-based Macs running Windows.
Specifications
- Chipsets: genuine FTDI and Atmel
- Firmware: EdiabasLib, pre-flashed
- Modes: K-Line and D-CAN, selected by the integrated switch
- Length: 52″ cable, 56″ total
- Quality control: every cable tested before shipping
- Warranty: 1 year
- Shipping: ships from the USA and is dropped at the post office the next day. Delivery time depends on the shipping method you choose.
Drivers and setup
- Download the official driver from FTDI’s driver page. On Windows 10 or 11, use the setup executable. Avoid driver packs from forums or download mirrors.
- Run the installer, then plug the cable into your computer.
- Wait for Windows to finish setting up the device. In Device Manager it appears under Ports (COM & LPT) as USB Serial Port.
- If it doesn’t appear correctly, open Device Manager, right-click the device, choose Update driver, then Browse my computer for drivers and select the folder where you extracted FTDI’s driver ZIP (with Include subfolders checked). If both USB Serial Converter and USB Serial Port show a warning, update both.
- Set the switch for your car, plug into the OBD port and open your software.
FAQ
Is this a genuine FTDI cable?
Yes. It uses genuine FTDI and Atmel chipsets. Many cheap cables advertised as FTDI use a different USB chip, which the official FTDI driver may not recognise.
Which switch position do I use?
Left (K-Line) for 1996 to 2007 vehicles, right (D-CAN) for 2007 and newer.
Will it work on my F- or G-Series?
For diagnostics and coding, yes. To flash F- and G-Series ECUs you need an ENET cable.
Does it work on a Mac?
It needs Windows (XP to 11, 32 or 64-bit) and is not compatible with ARM-based Macs running Windows.
Is there a warranty?
Yes. Every BTT KDCAN cable comes with a 1-year warranty.
Do I need to flash the firmware myself?
No. Every cable ships with EdiabasLib firmware already installed and is tested before it leaves.
What eBay buyers say about this cable
We also sell this exact cable on eBay. Out of 145 ratings for it there, 144 are positive (99.3%). A selection of recent feedback, quoted as written:
This cable is amazing. I went through two knock off cables and I thought it was my configuration that was bad. This is a super high quality cable and I would recommend it to anyone with a E series.
— p***8, verified eBay purchase, past 6 months
Item was exactly what we needed and it arrived very quickly. Highly recommend seller, A++!
— r***1, verified eBay purchase, past 6 months
Best D-Can in the market!!
— i***x, verified eBay purchase, past 6 months
The K-Cable was in my mailbox within a few days. It’s a really nice quality cable and brand new condition as described. It looks way better than all of the other options I was looking at for my BMW especially for the price.
— o***o, verified eBay purchase, past year
Product exactly what I was needing for my E46, quality product with super fast shipping! Highly recommend seller! Pleasure doing business with you! Thank you!
— d***r, verified eBay purchase, over a year ago
High quality cable and works perfectly.. dont cheap out on one of these cables!!!!
— j***r, verified eBay purchase, over a year ago
Great product and better customer service. Finally was able to read ECU and get the .bin file.
— a***e, verified eBay purchase, over a year ago
Had an issue with my cable and the seller fixed it right away
— i***x, verified eBay purchase, over a year ago
Objet conforme et fonctionne très bien avec lNPA lSTA (As described and works very well with lNPA and lSTA.)
— b***r, verified eBay purchase, over a year ago
Alternatively this can be purchased on eBay.




